Presentation Mode; Selecting A Presentation Mode - Furuno 1824C-BB Operator's Manual

2. RADAR OPERATION
3nm
12/
LP
H-UP
3. Choose the 1.5 nm or 3 nm with the RANGE key.
4. Press the C: PULSE soft key to select the pulselength setting. SHORT or MEDIUM for
1.5 nm, 1.5 sm, 3 km and MEDIUM or LONG for 3 nm, 3 sm,
6 km.
5. Press the E: RETURN soft key to finish.
2.9

Presentation Mode

This unit provides four radar presentation modes: head-up, course-up, north-up and true
motion.
Heading data is required for modes other than head-up.

2.9.1 Selecting a presentation mode

1. If not displayed, press the HIDE/SHOW key to show the radar soft keys.
2. Press the B: RADAR DISPLY soft key to show the RADAR DISPLAY soft keys.
3. Press the A: MODE soft key. Each pressing of the key changes the presentation mode
and the presentation mode indication in the sequence of North-up, True Motion,
Head-up, and Course-up.
Function
North-up
True Motion
Head-up
Course-up
4. Press the E: RETURN soft key to finish
Note: When heading data is lost, the presentation mode automatically goes to head-up, the
heading indication at the screen top shows "- - -.-°" and the audio alarm sounds. Press the
ALARM key to acknowledge the alarm. The message "HEADING DATA MISSING" appears.
Restore compass signal to show heading indication. Use the A: MODE soft key to select
presentation mode if necessary. The audio alarm may be silenced with the CLEAR key.
2-6
319. 9
Signal process soft keys
Indicator on display
N-UP
TR-M
H-UP
C-UP
°M
SIGNAL
PROCESS
I. REJ
A
OFF
E. AVG
Shown when radar
B
OFF
source is the Model
PULSE
18x4-BB/19x4-BB
C
ELONG
series radar. Not
E. STR
shown otherwise.
D
OFF
E RETURN
359.9 ˚R
+
11.70
nm
Soft key label
NTH UP
TRUE M
HD UP
CSE UP