Data Boxes Setup - Furuno NAVNET 1824C Operator's Manual

7. CUSTOMIZING YOUR UNIT
depth lines and soundings (depth contours, depth data, etc.)
Setting
SHOW FROM
TO
ROCKS BOTTOM TYPE DEPTH DISPLAY: Choose range for rocks depth display.
Setting
SHOW FROM
TO
7.5

Data Boxes Setup

You may select the data to show in the data boxes for the plotter, radar and sounder
displays. Six boxes may be displayed in case of small size data box and two for large size
data box.
1. Display the radar, plotter or sounder display, whichever you want to set.
2. Press the MENU key to open the main menu.
3. Press one of the following sets of soft keys depending on the display selected at step 1.
Plotter mode: PLOTTER SETUP, D. BOX
Radar mode: RADAR DISPLAY SETUP, D. BOX
Sounder mode: SOUNDER MENU, D. BOX
4. Use the Trackball to select an item, then press the EDIT soft key.
5. Select ON or OFF as desired.
6. Press the ENTER soft key or the ENTER knob to register your selection. Six items may
be set to ON for small data boxes; two for large data boxes.
7. Repeat steps 4-6 to turn other items on or off.
8. Press the MENU key to close the menu.
7-20
Setting Range
0-99999 m/ft/fa/pb
Setting Range
0-99999 m/ft/fa/pb
DATA BOX SIZE SMALL
POSITION ON
WAYPOINT OFF
COG ON
SOG ON
STW OFF
BEARING OFF
RANGE OFF
TIME TO GO OFF
ETA OFF
TEMPERATURE OFF
DEPTH OFF
TRIP LOG ON
DATE OFF
TIME OFF
WIND OFF
HEADING OFF
AIR TEMPERATURE OFF
AIR PRESSURE OFF
Data box menu
Default Setting
0 m/ft/fa/pb
1000 m/ft/fa/pb
Default Setting
0 m/ft/fa/pb
30 m/ft/fa/pb
DATA
BOX
EDIT
RETURN