iFIT WEIDER 2980 X User Manual page 18

32. Insert the Pad Tube (29) into the Front Leg (7).
Next, slide a Small Foam Pad (28) onto each end
of the Pad Tube (29).
Then, slide a Small Foam Pad (28) onto each side
of the Leg Lever (8).
33. Attach the Curl Pad (14) to the Curl Post (13) with
two M6 x 16mm Screws (62).
34. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
ADJUSTMENT, beginning on page 19.
Before using the weight system, pull each cable a few times to make sure that the cables move smoothly
around the pulleys. If one of the cables does not move smoothly, find and correct the problem.
IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is
used. See the CABLE DIAGRAM on page 22 for proper cable routing. If there is any slack in the
cables, you will need to remove the slack by tightening the cables. See MAINTENANCE on page 23.
32
28
33
14
18
29
7
28
28
8
28
13
62