Assembly - iFIT WEIDER 2980 X User Manual

ASSEMBLY

• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
• Assembly requires two persons.
• Because of its weight and size, assemble the
weight system in the location where it will be
used. Make sure that there is enough clearance
to walk around the weight system.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
packing materials until you fi nish all assembly
steps.
• Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
The Four Stages of the Assembly Process
Frame Assembly—You will begin by assembling
the base and the uprights that form the skeleton of
the weight system.
Arm Assembly—During this stage you will
assemble the arms and the leg lever.
1. Go to my.weiderfitness.com on your computer
and register your product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance is
ever needed
Note: If you do not have internet access, call
Member Care (see the front cover of this manual)
and register your product.
• To identify small parts, see page 6.
• In addition to the included tool(s), assembly
requires the following tool(s):
one Phillips screwdriver
one standard screwdriver
two adjustable wrenches
one rubber mallet
Assembly may be easier if you have your own
set of wrenches. To avoid damaging parts, do
not use power tools.
Cable Assembly—During this stage you will
attach the cables and pulleys that connect the
arms to the weights.
Seat Assembly—During the final stage you will
assemble the seat and the backrest.
1
7