iFIT WEIDER 2980 X User Manual page 17

Seat Assembly
29. Attach the Backrest (16) to the Upright (3)
with two M6 x 65mm Screws (70) and two M6
Washers (80).
30. Attach the Seat (15) to the Seat Frame (6) with
four M6 x 16mm Screws (62).
31. Attach the Lock Plate (73) to the Front Leg (7) with
an M10 x 68mm Bolt (71), an M10 Washer (57),
and an M10 Locknut (56). Do not overtighten the
Locknut; the Lock Plate must pivot easily.
Next, attach the Leg Lever Pin (38) to the
Front Leg (7) with an M4 x 19mm Self-tapping
Screw (69).
Then, insert the Leg Lever Pin (38) through the
Leg Lever (8) and the Lock Plate (73).
29
16
30
15
6
31
56 57
69
38
8
17
3
70
80
70
80
62
71
73
7