Loading Paper And Installing The Paper Tray - Fujitsu 10 ppm User Manual

Setting Up
1-10

Loading Paper and Installing the Paper Tray

This printer has a single paper tray that is preset for letter size (8.5 x 11.0
inches) paper for U.S. customers and to A4 size (210 x 297 mm) paper
for European customers. (You can adjust the paper tray to a different size
paper. See Chapter 3. You can purchase an optional paper tray. See
Chapter 4 and Appendix B.) You should load about 50 sheets of copier
paper to test the printer.
q
*
Notice:
Put the paper stack in the paper tray with the printing side faced down.
If paper is curled, remove the curl.
1. Pull the paper tray out of the
printer.
2. Prepare the paper tray.
Remove restraint cushion q.
Check green indicator w is
positioned according to the
tray size label (*).
w
3. Prepare a paper stack.
Prepare paper of the size
indicated by the size label (*).
Fan the paper stack both ways
to prevent sheets from
sticking together.
User's Manual