Loading Paper And Installing The Paper Tray - Fujitsu PrintPartner 12V User Manual

Setting Up
1-10

Loading Paper and Installing the Paper Tray

This printer has a single paper tray that is preset for letter size (8.5 x
11 .0 inches) paper for U.S. customers and to A4 size (210 x 297
mm) paper for European customers. (You can adjust the paper tray
to a different size paper. See Chapter 2. You can purchase an
optional paper tray. See Chapter 3 and Appendix B.) You should
load about 50 sheets of copier paper to test the printer.
1. Pull the paper tray out of
the printer.
2. Prepare the paper tray.
Remove restraint cushion
1. Check green indicator
2 is positioned according
to the tray size label (*).
3. Lock the pressure plate. If
the front of the stack is
raised, push it down until
the pressure plate clicks into
place.
4. Prepare a paper stack.
Prepare paper of the size
indicated by the size label
(*). Fan the paper stack
both ways to prevent sheets
from sticking together.
User´s Manual