Menu Items - Fujitsu 10 ppm User Manual

10/14 ppm page printer
Table of Contents

Advertisement

Menu Items

Menu Items
3-16
*8 Displayed when an FPS card is installed
*9 If the total capacity of memory is 7M bytes or less with banding
mode off, the resolution is automatically set to 300 dpi. When
printing on Legal size paper at 600 dpi, select "banding mode
on" or install additional memory cards of 10M bytes or more.
*10 This is essential for sharing the printer among multiple
computers.
*11 This is for the parallel interface.
*12 Displayed when a serial interface board is installed
*13 Displayed when a network interface board is installed
*14 Consists of four parameters. The one followed by < can be
changed.
The following briefly explains each item of the menu mode.
Page format menu
Copies
Paper/Envelope
Orientation
Form lines
Page protect
Quality menu
Smoothing
Resolution
Economy mode
Thick paper
The number of copies the printer prints from
each page
A paper size or envelope size to be used by the
printer
A printing direction
The number of lines printed per page
Whether a block of printer memory is reserved
exclusively for text and graphics data,
especially for printing dense text or complex
graphics, to prevent memory overflow errors.
However, it reduces the amount of printer
memory available for downloadable fonts.
Whether the edge smoothness technology is
applied (improves resolution to 1200 dpi class)
The number of dots printed per inch
Toner saving mode
Mode for printing thick paper. Be sure to turn
this off whenever you are using paper of
ordinary thickness.
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

14 ppmPrintpartner 10vPrintpartner 14v

Table of Contents