If Something Goes Wrong - Fujitsu 10 ppm User Manual

10/14 ppm page printer
Table of Contents

Advertisement

User's Manual

If Something Goes Wrong

This section briefly discusses the most common problems you might
encounter. For more complete troubleshooting information, see Chapter
6. Chapter 6 also describes all printer error and status indicators.
Problem
No response by printer
No printout; DATA
indicator on
Unreadable printout
Printing Your First Document
Remedy
Ensure that:
• The printer is turned on and online. The
ONLINE indicator should be lit.
• The cable from the computer to the printer
is properly connected at both ends.
• Your software program has sent the print
data to the printer. Many programs have a
printer control function that shows print
status.
The printer has received data from the
computer but has not printed the page. To
print the page, put the printer offline by
pressing
briefly then press
READY
.
FORM FEED
Possible causes and solutions are:
• A wrong printer driver is selected. Select
the PrintPartner 10V or 14V printer driver
as the document printer.
• The document contains unknown printer
commands. Remove any setup strings or
embedded commands, or print the
document with a Text only or ASCII text
print option.
GETTING
STARTED
1-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

14 ppmPrintpartner 10vPrintpartner 14v

Table of Contents