Periodic Routine Maintenance; Replacing The Toner Bottle - Fujitsu 10 ppm User Manual

10/14 ppm page printer
Table of Contents

Advertisement

Periodic Routine Maintenance

Periodic Routine
Maintenance
5-2
Table 5-1 lists the printer's periodic routine maintenance and indicates
when this maintenance should be performed.
Table 5–1 Periodic Routine Maintenance
Maintenance
Replace toner bottle
Replace print unit
Clean corona wire
Clean paper path
Clean precharger wire

Replacing the Toner Bottle

The toner bottle is designed to last approximately 5000 printed pages
under the condition of 5% coverage on A4 paper or last about one year
after unpacking. The first toner bottle may print slightly fewer pages.
Replace the toner bottle when the message display indicates
or
TONER EMPTY
or when printing becomes lighter than you find
satisfactory. After the toner low condition occurs, you can only print
about 20 more pages. Under the toner empty condition (no toner),
the printer will not work.
When to perform
When the message display indicates
TONER LOW
or
TONER EMPTY
printing is too light
When print quality is bad, even after
replacing or cleaning other parts
When the message display indicates
<CLEAR WARNING> PRINT UNIT
(Replace the print unit at the next
replacement of the toner bottle)
When replacing the print unit or toner
bottle, when printout shows vertical white
lines, or when printing is too light
When replacing the print unit or toner
bottle, after clearing a paper jam, or when
printouts show toner smudging
When print density is uneven or when
printing shows black vertical lines
, or when
TONER LOW
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

14 ppmPrintpartner 10vPrintpartner 14v

Table of Contents