Selecting Paper Tray, Mff, Or Manual Paper Feed - Fujitsu 10 ppm User Manual

10/14 ppm page printer
Table of Contents

Advertisement

Control Panel Functions
3-10

Selecting Paper Tray, MFF, or Manual Paper Feed (

Pressing
TRAY SELECT
you to select paper sources to be used. The paper sources are tray 1, tray 2
(if installed), MFF (if installed), and manual feed slot. When a paper
source runs out of paper, the printer switches it for another one. When
the manual feed slot is selected, other paper sources are made invalid.
To select a paper source, follow these steps:
1. Make sure that the message display indicates
ONLINE and DATA indicators off.
2. Press the
TRAY SELECT
The message changes to
tray 1 is selected.
3. Select or deselect a paper source.
This step is valid when tray 2 or MFF (option) is installed. Pressing
the
button in this condition makes the asterisk disappear. Tray
ENTER
1 is deselected. Pressing the
reappear. Tray 1 is selected.
4. Select or deselect other paper sources.
Press the
or
+
-
Use the
button in the same way as described above.
ENTER
5. Save the selections.
Press
button to save the new settings and return to the
READY
ready state.
TRAY SELECT
READY
or
+
-
puts the printer in tray select mode which allows
button briefly.
TRAY
TRAY1*
button again makes the asterisk
ENTER
buttons briefly to display another paper source.
TRAY
TRAY1*
TRAY
TRAY2
TRAY
MFF
TRAY SELECT
READY
with the
. The asterisk means that
MANUALFEED OFF*
MANUALFEED
ON
User's Manual
)

Advertisement

Table of Contents
loading

This manual is also suitable for:

14 ppmPrintpartner 10vPrintpartner 14v

Table of Contents