Xilinx Spartan-6 User Manual page 11

2.
X-Ref Target - Figure 1-3
Spartan-6 FPGA GTP Transceiver SIS Kit (HyperLynx)
UG396 (v1.0) June 10, 2010
Make the desired changes to any of the parameters, and press the OK button to exit.
This writes the necessary configuration files for the simulation.
Note:
The frequency of the pulse train or the time of the bit interval specified in the oscilloscope
must match the Data rate setting in the TX configurator (see
done explicitly.
Figure 1-3: Configure Spartan-6 FPGA GTP Transmitter
www.xilinx.com
Getting Started
Figure 1-3). Each setting must be
UG396_c1_03_042010
11