Adjusting The Image Position Controls - FARGO electronics HDP820 Service Manual

RESTRICTED USE ONLY

Adjusting the Image Position controls

Use the Image Position controls to position the image on a card (to be adjusted).
Step Procedure
Adjust the Image Position values by clicking on the Vertical and Horizontal
1
adjustment arrows.
•
These values ensure that the Cards always remain in the same position as
they travel through the Printer (regardless of image orientation).
•
The Card Illustration (shown in the Image Position box) will flip and rotate
according to the selection of Portrait, Landscape or Rotate 180 Degrees.
•
The outline around the illustration will always remain in the same Landscape
orientation.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
Fargo Electronics, Inc.
Continued on the next page
205