Using The Image Position Controls - FARGO electronics DTC300 Service Manual

RESTRICTED USE ONLY

Using the Image Position Controls

Use the Image Position controls to adjust the position of the overall print area to be
precisely centered on a card.
Step Procedure
Click on the Vertical and Horizontal adjustment arrows to adjust the Image
1
Position values.
•
When adjusting these values, keep in mind that cards always remain in the
same position while moving through the Printer, regardless of image
orientation.
•
To illustrate this, the card illustration shown in the Image Position box will flip
and rotate according to the Portrait, Landscape or Rotate 180 Degrees
selection.
•
The outline around the illustration will always remain in the same Landscape
orientation.
DTC400/DTC300/DTC300M Card Printer Service Manual (Rev. 1.3)
Fargo Electronics, Inc.
6-46