Encoding The Mode/Coercivity/Magnetic Track Selection - FARGO electronics HDP820 Service Manual

RESTRICTED USE ONLY

Encoding the Mode/Coercivity/Magnetic Track Selection

Use the ISO option for encoding capability for either high- or low-coercivity cards on tracks 1,
2 and 3 and is the industry's standard mode of magnetic encoding.
Step Procedure
1 Select the Coercivity option to select the Magnetic Stripe type that matches the
card type.
•
High Coercivity = 2750-4000 Oersted (Fargo's High Coercivity UltraCards
are 2750Oe)
•
Low Coercivity = 300 Oersted
2 Select the Magnetic Track Selection option to specify which track is to be
configured through the Magnetic Track Options (if the application being used
requires customization of the standard ISO encoding process).
3 Customize these options if the application requires it; even though, the default
ISO Magnetic Track Options should be correct for most applications. (Note: All
options must be changed separately for each of the three individual tracks.)
a. Set these options back to the ISO standard settings once they have been
changed by selecting the Default button for each of the separate tracks.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
Fargo Electronics, Inc.
221