Selecting The Print Ymc Under The K And Print K Only Options - FARGO electronics HDP820 Service Manual

RESTRICTED USE ONLY

Selecting the Print YMC under the K and Print K Only options

Step Procedure
1 Use the Defined Area function.
a. Define an area by clicking on the Defined Area UP arrow. (Note: Another
.2" x .2" (5mm x 5mm) area will appear in the lower left-hand corner. This is
the location in which all newly defined areas will first appear. Up to 5 areas
can be defined.)
•
Additional areas cannot be added until the most recently created area
has been moved or sized. For this reason, size and position each area as
it is created.
•
Use the Defined Area arrows to navigate back and forth from area to
area. The active area will always be highlighted with a dotted outline.
b. Delete an area by using the Defined Area arrows to select the area and click
on the Delete button. (Note: If all areas are deleted, the K Panel Resin
options will automatically be deselected.)
2 Select the Print YMC Under K option to print all black in the designated areas
with the Yellow (Y), Magenta (M) and Cyan (C) ribbon Panels directly beneath
the resin black (K) Panel. (Note: Select this option if printing resin black text or
barcodes onto a colored background to provide a more gradual transition
between the two.)
OR
Select the Print K Only option to print all black in the designated areas only with
the resin black (K) Panel or to print resin black onto a white background to
maximize the sharpness of printed text and barcodes.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
Fargo Electronics, Inc.
Continued on the next page
216