Table of Contents
Advertisement
8. Delete: Will delete the selected camera from Table 2 and move it to Table 1.
9. Delete All: Will delete all cameras from Table 2 and move them to Table 1.
10. Manual Edit: This will take you to an advanced menu where you can manually adjust
things like the camera's protocol, the IP address and the video stream of the cameras in
Table 2. It should only be used by advanced users with specific networking knowledge.
11. Arrows: Allows you to move the selected camera to a different channel.
Channel OSD (On Screen Display)
This menu lets you update your camera's name and adjust the image settings.
Function
CAMERA
CAMERA NAME
IMAGE SETTINGS
CONNECT QUALITY
32
Description
Allows you to select which camera to modify.
Shows the current name and allows you to edit the name of the selected
camera.
Allows you to modify video image settings for the selected camera.
Select to Enable or Disable the signal quality identifier.
WNIP2 Series User's Manual
- Quick Links:
- Initial Setup
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WNIP2 Series and is the answer not in the manual?
Questions and answers
I have model WNIP-2LTA-BS-U stand alone camera. I previously had this device in use for my garage. we had to change routers and now have different password. I **** not able to get the camera connected
To connect the Night Owl WNIP-2LTA-BS-U camera to a new router with a different password, you need to bypass its default pairing with the NightOwl NVR. Follow these steps:
1. Configure a wireless access point (AP) with the same SSID and password (PSK) that the camera was originally paired with.
2. Set up a new VLAN on your router or firewall with the same IP range that was used by the original NVR.
3. Assign this VLAN to the AP to simulate the original NVR environment.
4. Add routing rules in your firewall so that your LAN can access the camera network.
5. The cameras will connect to the new AP using the same credentials and be accessible as standalone ONVIF-compatible cameras.
This setup removes the cameras from NightOwl's control and allows use with third-party NVRs like BlueIris or VLC.
This answer is automatically generated
I need help with getting the phone on the App
To connect your Night Owl WNIP2 Series camera to the app:
1. Open the Night Owl Protect app.
2. Tap "Add New" and select "Standalone Camera."
3. Tap "OK" to allow the app to scan the camera’s QR code.
4. Tap "Use Your Network to Discover Your Device," then tap "OK."
5. Tap "Use Your Network to Discover Your Device" again.
6. Tap on the detected device and confirm by tapping "Yes."
7. Go to your device settings, tap "Wi-Fi," and connect to the network starting with "noip."
8. Once connected (checkmark appears), return to the app.
9. The app will search for the camera automatically.
10. Select your Wi-Fi network, enter the password, and tap "Continue."
11. When the screen says "Device has been added" and the camera says "Woohoo," setup is complete.
12. Name the camera and tap "Live View" to see the live stream.
This answer is automatically generated