Table of Contents
Advertisement
Main Menu Options
The main menu lets you access many of your Wi-Fi NVR's great features. You can customize
camera names, keep track of recent events, create recording schedules, configure advanced
motion detection settings, check up on the hard drive's condition and change other settings.
1. General: Allows access to Network, DDNS and Time Setup settings.
2. Camera: Will provide access to Status, Add Camera, On-Screen Display, Video Quality and
Camera Firmware Update submenus.
3. Record: Will provide access to Record Settings and Export Recordings submenus.
4. Hard Drive: Will provide access to the HDD menu, allow you to reformat your HDD and
make other changes.
5. System: Will allow access to System Settings, Wi-Fi Settings, User Management, Device
Info and Log and Camera Speed submenus.
6. Maintenance: Will allow access to System Maintenance, Firmware Update and Factory
Default submenus.
26
1
2
3
4
5
6
WNIP2 Series User's Manual
- Quick Links:
- Initial Setup
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WNIP2 Series and is the answer not in the manual?
Questions and answers
I have model WNIP-2LTA-BS-U stand alone camera. I previously had this device in use for my garage. we had to change routers and now have different password. I **** not able to get the camera connected
I need help with getting the phone on the App
To connect your Night Owl WNIP2 Series camera to the app:
1. Open the Night Owl Protect app.
2. Tap "Add New" and select "Standalone Camera."
3. Tap "OK" to allow the app to scan the camera’s QR code.
4. Tap "Use Your Network to Discover Your Device," then tap "OK."
5. Tap "Use Your Network to Discover Your Device" again.
6. Tap on the detected device and confirm by tapping "Yes."
7. Go to your device settings, tap "Wi-Fi," and connect to the network starting with "noip."
8. Once connected (checkmark appears), return to the app.
9. The app will search for the camera automatically.
10. Select your Wi-Fi network, enter the password, and tap "Continue."
11. When the screen says "Device has been added" and the camera says "Woohoo," setup is complete.
12. Name the camera and tap "Live View" to see the live stream.
This answer is automatically generated