Table of Contents
Advertisement
Step
Set Up Your Wi-Fi NVR
4.
IMPORTANT: Night Owl STRONGLY recommends that you have the Wi-Fi NVR connected to
If you still do not wish to connect to the Internet, follow the steps in Disconnected from the
Internet.
Connected to the Internet (Strongly Recommended Method)
1. Once your Wi-Fi NVR is connected to a power source, the Wi-Fi NVR immediately begins
to boot up and checks for the latest firmware. This process may take several minutes.
2. Click Continue on the Your Firmware is up to Date screen.
3. Select your preferred language and click Continue.
Support.NightOwlSP.com
the Internet for initial setup. This connection allows the Wi-Fi NVR to easily
download the latest firmware and run through the Set Up Wizard quickly. You
can disconnect your Wi-Fi NVR from the Internet after your system is setup
and running, if you wish. Note that if you do disconnect from the Internet, you
will not receive automatic firmware updates that include system upgrades and
you will be unable to get help from our Technical Support Team without the
latest firmware running.
7
- Quick Links:
- Initial Setup
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WNIP2 Series and is the answer not in the manual?
Questions and answers
I have model WNIP-2LTA-BS-U stand alone camera. I previously had this device in use for my garage. we had to change routers and now have different password. I **** not able to get the camera connected
I need help with getting the phone on the App
To connect your Night Owl WNIP2 Series camera to the app:
1. Open the Night Owl Protect app.
2. Tap "Add New" and select "Standalone Camera."
3. Tap "OK" to allow the app to scan the camera’s QR code.
4. Tap "Use Your Network to Discover Your Device," then tap "OK."
5. Tap "Use Your Network to Discover Your Device" again.
6. Tap on the detected device and confirm by tapping "Yes."
7. Go to your device settings, tap "Wi-Fi," and connect to the network starting with "noip."
8. Once connected (checkmark appears), return to the app.
9. The app will search for the camera automatically.
10. Select your Wi-Fi network, enter the password, and tap "Continue."
11. When the screen says "Device has been added" and the camera says "Woohoo," setup is complete.
12. Name the camera and tap "Live View" to see the live stream.
This answer is automatically generated