Table of Contents
Advertisement
Device Info
This menu lets you see your system's model number, software and hardware versions, UID
(Unique Identifier) and QR Code for remote connectivity. If you have not already done so,
you can also log in to your Night Owl Protect account for easy remote viewing and added
features and benefits.
Function
DEVICE MODEL
UID
HARDWARE ID
SOFTWARE VERSION
BUILT TIME
SUPPORT WEB
PROTECT ACCOUNT
QR CODE
Support.NightOwlSP.com
Description
Displays your Wi-Fi NVR model number.
Unique Device ID number that identifies your Wi-Fi NVR.
The current hardware version of your Wi-Fi NVR.
The current firmware version of your Wi-Fi NVR.
The date and release time for the current firmware.
Night Owl support site web address.
If you did not do so during the initial setup of your system, you can now log
in to your Night Owl Protect account to begin remote viewing and receive
added features and benefits.
QR code that represents the UID number of the Wi-Fi NVR. You can scan this
when performing a QR code setup to add this Wi-Fi NVR to the Night Owl
Protect App.
41
- Quick Links:
- Initial Setup
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WNIP2 Series and is the answer not in the manual?
Questions and answers
I have model WNIP-2LTA-BS-U stand alone camera. I previously had this device in use for my garage. we had to change routers and now have different password. I **** not able to get the camera connected
To connect the Night Owl WNIP-2LTA-BS-U camera to a new router with a different password, you need to bypass its default pairing with the NightOwl NVR. Follow these steps:
1. Configure a wireless access point (AP) with the same SSID and password (PSK) that the camera was originally paired with.
2. Set up a new VLAN on your router or firewall with the same IP range that was used by the original NVR.
3. Assign this VLAN to the AP to simulate the original NVR environment.
4. Add routing rules in your firewall so that your LAN can access the camera network.
5. The cameras will connect to the new AP using the same credentials and be accessible as standalone ONVIF-compatible cameras.
This setup removes the cameras from NightOwl's control and allows use with third-party NVRs like BlueIris or VLC.
This answer is automatically generated
I need help with getting the phone on the App
To connect your Night Owl WNIP2 Series camera to the app:
1. Open the Night Owl Protect app.
2. Tap "Add New" and select "Standalone Camera."
3. Tap "OK" to allow the app to scan the camera’s QR code.
4. Tap "Use Your Network to Discover Your Device," then tap "OK."
5. Tap "Use Your Network to Discover Your Device" again.
6. Tap on the detected device and confirm by tapping "Yes."
7. Go to your device settings, tap "Wi-Fi," and connect to the network starting with "noip."
8. Once connected (checkmark appears), return to the app.
9. The app will search for the camera automatically.
10. Select your Wi-Fi network, enter the password, and tap "Continue."
11. When the screen says "Device has been added" and the camera says "Woohoo," setup is complete.
12. Name the camera and tap "Live View" to see the live stream.
This answer is automatically generated