Table of Contents
Advertisement
Initial Setup
Night Owl strongly recommends that you complete the following sections in the order
that they are listed to quickly and easily set up your system:
• Step 1. Verify Your Package Contents
• Step 2. Download the Night Owl Protect App and Create Your Account
• Step 3. Connect Your System
• Step 4. Set Up Your Wi-Fi NVR
• Step 5. Install the Cameras
• Step 6. Pair a Replacement / Add-On Camera (If Needed)
Step
Verify Your Package Contents
1.
Before you begin to install your system, ensure you can identify all of the parts listed in
this section. Images may vary slightly based on your model number.
Wi-Fi NVR
Wi-Fi NVR Power
6 ft. HDMI (x1)
Adapter (x1)
USB Mouse (x1)
NOTE: For best results use Night Owl accessories. Third party accessories or
2
6 ft. Ethernet (x1)
Wi-Fi NVR
Antenna(s) (x2)
products under a different brand may not work as well.
Wi-Fi Camera
Antenna(s)
(1 per Camera)
Items Not Included
RESET
LAN1
LAN2
LAN3
LAN4
WAN
Monitor
Router
Camera(s)
Camera Power
Mounting
Adapter(s)
Hardware
(1 per 4 cameras)
NOTE:
Internet access
is STRONGLY
recommended for this
initial setup. A TV or
monitor with a minimum
1080p HD resolution
and an HDMI input is
required for the initial
setup.
WNIP2 Series User's Manual
- Quick Links:
- Initial Setup
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WNIP2 Series and is the answer not in the manual?
Questions and answers
I have model WNIP-2LTA-BS-U stand alone camera. I previously had this device in use for my garage. we had to change routers and now have different password. I **** not able to get the camera connected
I need help with getting the phone on the App
To connect your Night Owl WNIP2 Series camera to the app:
1. Open the Night Owl Protect app.
2. Tap "Add New" and select "Standalone Camera."
3. Tap "OK" to allow the app to scan the camera’s QR code.
4. Tap "Use Your Network to Discover Your Device," then tap "OK."
5. Tap "Use Your Network to Discover Your Device" again.
6. Tap on the detected device and confirm by tapping "Yes."
7. Go to your device settings, tap "Wi-Fi," and connect to the network starting with "noip."
8. Once connected (checkmark appears), return to the app.
9. The app will search for the camera automatically.
10. Select your Wi-Fi network, enter the password, and tap "Continue."
11. When the screen says "Device has been added" and the camera says "Woohoo," setup is complete.
12. Name the camera and tap "Live View" to see the live stream.
This answer is automatically generated