Configuration using the WBM
7.3 The menu items of the WBM
7.3.4
The "Settings - Communication" menu item
The "Settings - Communication" menu item is divided into the following tabs.
• Network interfaces
• XML
• OPC UA
In the "Network interfaces" tab, you can enable/disable the network ports, SNMP and NTP
protocols. In the "XML" tab, you can specify which data is sent via the XML interface. In the
"OPC UA" tab, you can enable and edit the OPC UA server function of the communications
module.
The "Network interfaces" tab
The "Network interfaces" tab is divided into the following areas:
• Network basic settings
• SNMP
• NTP
• Syslog messages
Figure 7-6
The "Settings -- Communication" menu item, "Network interfaces" tab
76
Operating Instructions, 03/2022, C79000-G8976-C578-02
SIMATIC RF166C