Siemens SIMATIC RF166C Operating Instructions Manual page 46

Connecting
5.8 Setting the PROFIBUS DP address
4. Switch the supply voltage off and on again.
The following figure shows the rotary coding switches for setting the PROFIBUS address:
①
②
Figure 5-12
The following table below shows the setting for PROFIBUS address "26" as an example:
Table 5- 6
46
Rotary coding switch for setting the PROFIBUS DP address (10th position)
Rotary coding switch for setting the PROFIBUS DP address (1st position)
PROFIBUS address adjuster on the RF166C
Setting example of the PROFIBUS address
10th position
1st position
Operating Instructions, 03/2022, C79000-G8976-C578-02
Position 2
Position 6
SIMATIC RF166C