The "Diagnostics - Service Log" Menu Item - Siemens SIMATIC RF166C Operating Instructions Manual

Hide thumbs Also See for SIMATIC RF166C:
Table of Contents

Advertisement

Configuration using the WBM
7.3 The menu items of the WBM
7.3.7

The "Diagnostics - Service Log" menu item

The service log of the communication module is displayed in the "Diagnostics - Service Log"
menu item. The log records internal processes of the communication module and is required
for service support by SIEMENS specialists. Only make settings on this page if you are
instructed to do so by SIEMENS personnel. The log entries are also evaluated by SIEMENS
personnel.
Figure 7-11
The "Diagnostics - Service Log" menu item
This page displays all the message types that have been defined in the "Settings - General >
Service logbook settings" menu.
The entries contain the following properties:
Table 7- 21
Property
Date/time
Type
Entry
90
Displayed properties of the log messages
Description
Time stamp when the entry was made by the communications module.
Note that the time stamp is generated by the device clock (UTC time). This time
is compared with the time format and time zone set on the PC and displayed
accordingly.
Type of message
Which message types are signaled depends on the check boxes enabled in the
menu item "Settings - General" in the "Log settings" area.
Text of the message
Operating Instructions, 03/2022, C79000-G8976-C578-02
SIMATIC RF166C

Advertisement

Table of Contents
loading

Table of Contents