Table of Contents
Advertisement
Table 30. AMT Configuration
Parameter
AMT BIOS Features
MEBx hotkey Pressed
Onboard Devices Configuration
Figure 38. Onboard Devices Configuration
Table 31. Onboard Devices Configuration
Parameter
Serial Port Configuration
COM1 Device Settings
COM1 Control
COM2 Device Settings
COM2 Control
COM3 Device Settings
44
BIOS Setup
Settings
Disabled, Enabled
Disabled, Enabled
Settings
IO=3F8h; IRQ=4;
RS232, RS422, RS485
IO=2F8h; IRQ=3;
RS232, RS422, RS485
IO=3E8h; IRQ=5;
Description
When disabled, AMT BIOS features are no longer supported
and the user is no longer able to access MEBx setup. This
option does not disable manageability features in firmware.
OEMFLag Bit 1: Enable automatic MEBx hotkey press.
Description
-
Select COM1 mode. RS232, RS422, or RS485.
-
Select COM2 mode. RS232, RS422, or RS485.
-
Advertisement
Table of Contents
