Amt Configuration - Dell EMC Edge Gateway 5200 User Manual

Table 29. TPM 2.0 Configuration (continued)
Parameter
Physical Presence Spec
Version
PH Randomization
Device Select

AMT Configuration

Figure 37. AMT Configuration
Settings
1.2, 1.3
Disabled, Enabled
TPM 1.2, TPM 2.0, Auto
Description
Select to tell the operating system to support PPI Spec
Version 1.2 or 1.3. Some HCK tests might not support 1.3.
Enables or disables Platform Hierarchy randomization. Do
not enable in production platforms. This is for development
testing. Override ChangePlatformAuth ELINK for production
platforms supporting TXT.
TPM 1.2 restricts support to TPM 1.2 devices. TPM 2.0
restricts support to TPM 2.0 devices. Auto supports both
with the default set to TPM 2.0 devices. If not found, TPM 1.2
devices are enumerated.
BIOS Setup 43