Lifesize Multipoint 230 Media Blade Panel Features - LifeSize Multipoint 230 Installation Manual

LifeSize Multipoint 230 Media Blade Panel Features

L S
IFE IZE
M 230
ULTIPOINT
M B
EDIA LADE
P F
ANEL EATURES
12 <Book title goes here>
Figure 2-3 Media Blade Front Panel
1
STATUS
Table 2-2 Media Blade Panel Features
Component
1 STATUS LED
2 Serial connector
3 100/1000 BASE-T
Ethernet connectors
4 Ethernet connector
Link/Activity LEDs
5 RESET button
6 HOT SWAP LED
2 4
3
Description
Lights green to indicate normal operation. Lights red to
indicate that an error has occurred and that the Media
Blade requires resetting.
A DB-9 connector that allows you to connect a PC
terminal for local configuration, maintenance and
debugging.
RJ-45 connectors that provide the primary LAN
connection for the IP network port.
The top part of each Ethernet connector contains two LED
indicators. The right LED lights green when the local IP
network link is active. The left LED lights green if the
connection speed reaches 1000 Mbps, and lights orange if
the connection speed reaches 100 Mbps.
Allows you to reset the Media Blade manually.
Lights blue when the latches of the board are unlocked and
it is safe to remove the board from the chassis, and during
reset. Goes off when the board is completely detached.
5 6
MEDIA BLADE
RESET
HOT SWAP