2N Indoor View User Manual page 97

Status and Description
Incoming Call
User Actions
The device is playing the selected ringtone. The display shows the
camera view if available, CLIP and Incoming call message.
Pick up call
Reject call
Door unlocking
The camera is
switched (if
installed and
configured in the
2N IP intercom).
Increase and
decrease ringtone
volume
2N® Indoor View User Manual
Navigation
Touch of the
display
Press the call end
button
Press the lock
button
Press the button
for switching the
camera /
Press the
button and select
the required
volume with the
+ or − button, or
by moving the
volume marker
on the volume
bar.
Actions and Result
The connection is
established and the In call
mode is switched on.
The incoming call is
discontinued and Home
page is returned to.
A call is set up or not
depending on the
connection type and the
door is unlocked. If
automatic call end after
unlocking is enabled, the
call is ended after door
unlocking.
The display shows a
preview from the other
camera, identification of
the device being called to
and the message Incoming
Call.
The volume of the ringtone
is increased or decreased
by one level at each
individual press of + or −. If
the volume marker is
moved, the ringtone is
increased or decreased
according to the position
on the volume bar.
97 / 110