2N Indoor View User Manual page 71

List of Parameters
• Synchronize with browser – click the button to synchronize the device time with your
current PC time value.
• Automatic Detection – define whether the time zone shall be detected automatically
from My2N. In case automatic detection is disabled, the Manual selection parameter is
Used (manually selected time zone or Own rule).
• Detected Time Zone – display the automatically found time zone. In case the function is
unavailable or disabled, N/A is displayed.
• Manual Selection – set the installation site time zone. Set the time shift and summer/
winter time transitions.
• Custom Rule – if the device is installed on a site that it not included in the Time Zone
parameter, set the time zone rule manually. The rule is applied only if the Time Zone
parameter is set to Manual.
• Use NTP Server – enable the use of the NTP server for internal time Synchronization.
• NTP Server Address – set the IP address/domain name of the NTP server used for the
device internal time synchronization.
• NTP Time Status – display the state of the last local time synchronization attempt via
NTP: Unsynchronized. Synchronized, Error.
2N® Indoor View User Manual
71 / 110