®
Select the 2N
Indoor View device to be configured and right-click it. Select Browse... to open
®
the 2N
Indoor View administration web interface login window for configuration. To change
the device IP address, select Config and enter the required static IP address or activate DHCP.
The default configuration password is 2n. If the found device is grey highlighted, its IP address
cannot be configured using this application. In that case, click Refresh to find the device again
and check whether multicast is enabled in your network.
Tip
•
Double click the selected row in the 2N
device web interface easily.
®
2N
IP Network Scanner
®
IP Network Scanner list to access the
2N® Indoor View User Manual
20 / 110