2N Indoor View User Manual page 102

7. Technical Parameters
Power Supply
• Type: 12 V DC +/−10 % adapter or PoE 802.3af
• Recommended power supply: 12 V / 1 A
• Polarity reversal protection: yes
Power Consumption
• In idle:
• 12 V: 2,28 W – 0,19 A
• PoE: 2,9 W
• Max. in active state: 12 W / 1 A
User Interface
• Controls: capacitive touch panel
• Display: 7´´ with 1024 x 600 pixel resolution
• Service:RESET button with long press option for factory reset
Signalling protocol
• SIP (UDP, TCP, TLS)
Audio
• Microphone: integrated
• Speaker: 2 W integrated
• Induction loop output: 600 mV RMS
Audio stream
• Protocols: RTP / RTSP
• Codecs: G.711, G.729, G.722, L16/16kHz
Video stream
• Protocols: RTP / RTSP / HTTP, MJPEG
• Codecs: H.264, M-JPEG
Interface
• LAN: 10/100BaseT, RJ-45; Cat5e or higher
Doorbell Input
• Input type: switching contact (button/relay)
• Contact type: normally open (NO)
• Contact parameters: up to 50 V / 5 mA, DC
Mechanical Parameters
• Dimensions (w x h x d): 193 x 157 x 50 mm
• Weight: 555 g
2N® Indoor View User Manual
102 / 110