2N Indoor View User Manual page 44

• Call Answering Mode (SIP 1, SIP 2) – set the way of receiving incoming calls. The
following three options are available:
• Always busy – the device rejects incoming calls.
• Manual answering – the device rings to signal incoming calls and the user can press
a keypad button to pick up.
• Automatic – the device picks up incoming calls automatically. You can set the call
receiving mode for each SIP account separately.
• Local Call Receiving Mode – set the way of receiving incoming local calls.
• Always busy – the device rejects incoming calls.
• Manual answering – the device rings to signal incoming calls and the user can press
a keypad button to pick up.
• Automatic – the device picks up incoming calls automatically. You can set the call
receiving mode for each SIP account separately.
• Pick up in – this parameter is only active when the Automatic pickup mode is enabled.
The call is picked up automatically after the preset timeout.
• Ring Time Limit – set the maximum call setup and ringing time in which all outgoing calls
are automatically terminated. If the calls are routed to the GSM network via GSM
gateways, you are advised to set a value longer than 20 s. Minimum value: 1 s, maximum
value: 600 s. Set 0 to disable the time parameter.
• Save Image during Call – if enabled, one or more snapshots are automatically taken from
each video call and saved into the call log (depending on the device type and setting).
More snapshots can be taken manually during a call in some devices.
2N® Indoor View User Manual
44 / 110