LAN Device count – display the number of local devices in the network.
Show LAN devices list – display a detailed list of local devices in the network.
3.2.3.2 Unlocking
Unlocking is another function of 2N
parameters.
•
Default Unlock Code – use this code when a call has been set up with a device/phone
number that is not added to the unit phone book.
•
Hang Up After Door Unlocking – end the call when the door unlocking request has been
sent successfully.
•
Hang-Up Timeout – end the call when the door unlocking request sending timeout has
elapsed.
®
Indoor View, which sets the remote door unlocking
2N® Indoor View User Manual
49 / 110