2N Indoor View User Manual page 67

801.1x
• Device Identity – username (identity) for authentication via EAP-MD5 and EAP-TLS.
• MD5 Authentication Enabled – enable authentication of network devices via the 802.1x
EAP-MD5 protocol. Do not enable this function if your LAN does not support 802.1x. If you
do so, the intercom will become inaccessible.
• Password – enter the access password for EAP-MD5 authentication.
• TLS Authentication Enabled – enable authentication of network devices via the 802.1x
EAP-TLS protocol. Do not enable this function if your LAN does not support 802.1x. If you
do so, the intercom will become inaccessible.
• Trusted Certificate – specify the set of trusted certificates for verification of the RADIUS
server public certificate validity. Choose one of three sets of certificates; refer to the
Certificates subsection. If no trusted certificate is included, the RADIUS public certificate is
not verified.
• User Certificate – specify the user certificate and private key for verification of the
intercom authorisation to communicate via the 802.1x-secured network element port in
2N® Indoor View User Manual
67 / 110