Operation - ADJ STARTEC BOOM BOX FX2 User Manual

Boom Box FX2
Universal DMX Control: This function allows you to use a univer-sal DMX-512 controller to control
the patterns, rotation and strobing. A DMX controller allows you to create unique programs tailored
to your individual needs.
1. The Boom Box FX2 has a 2 DMX channel modes; a 3 channel mode and 19 channel mode. See
pages 21-24 for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures on pages 7-9 as well as the
set-up specifications that are included with your DMX controller.
3. Follow the instructions on page 13 to select your desired DMX channel mode and set the DMX
address.
4. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
5. For help operating in DMX mode consult the manual included with your DMX controller.
Sound Active Mode: This mode allows a single unit or several units linked together, to run to the
beat of the music.
1. Press the MENU button until "Soun" is displayed, and press ENTER.
2. Press the UP or DOWN buttons to either activate sound active mode or deactivate, and press
ENTER. The unit will now run to the beat of the music.
3. The sound sensitivity can be adjusted by pressing the MENU button until "Sens" is displayed,
and then press ENTER. Use the UP or DOWN buttons to adjust the sound sensitivity, 0 being the
least sensitive, and 100 being the most sensitive.
Show Mode: This mode allows a single unit or several units linked together, to run 1 of 9 built-in
shows.
1. Press the MENU button until "Shnd" is displayed, and press ENTER.
2. Press the UP or DOWN buttons to find your desired show and press ENTER. The unit will now
run your chosen built-in program.
ADJ Products, LLC - www.adj.com - Boom Box FX2 User Manual Page 17

Operation