Table of Contents
Advertisement
Chapter 4 Description of the labeling system
4.
Description of the labeling system
The labeling station is used to label square products on the top side automatically.
Depending on kind and dimension of the product, different label sizes are used.
Further function descriptions about machine components can be found in the
chapter "Adjustment and initial operation".
Product inlet
The products are fed manually or by a conveying system provided by the customer at
infeed passage of the labeling station. Care should be taken on accurate alignment of the
products.
These are held by side guidance on the base conveyor in a row.
Top side labeling
A labeler that is installed above the base conveyor applies the labels in throughput on the
top side of the product.
Product outfeed
The base conveyor forwards the finished labeled products to the outfeed. Here the
products are removed manually or by the customer's conveying system.
Version: 12.05.14
Page 22 of 56
40001684 Geset 111
GB
Advertisement
Table of Contents
