Correcting Adjustments Based On Labeler Result - Weber Geset 111 Original User Manual

Chapter 10 Troubleshooting

Correcting adjustments based on labeler result

Based on the labeler result you can draw conclusions from the necessary adjustments.
Correct labeling
If the labeling is performed correctly, the label is

free from creases,

straight,

always at the same position on the product.
No correction is necessary.
Error at labeling
The label has creases.
Correct the labeling result as follows:
Step
1
Version: 12.05.14
Procedure
The application speed of the label may be too fast. Examine and correct the
application speed.
Page 53 of 56
40001684 Geset 111
Fig. 10-1: Product with correct labeling result
Fig. 10-2: Product with creases in the label
GB