Allen-Bradley 2707-M232P3 User Manual page 97

Objectives
Accessing
Special Functions
DTAM Micro Special Controller Functions
This appendix describes the Special Menu used to access to special features
for controller operations.
Section
Accessing Special Functions
Using the P-A/D Function
Reading Controller Input and Output Files
Reading / Writing Controller Status Files
Reading / Writing Controller Bit and Integer Files
Reading / Writing Controller Timer Files
Reading / Writing Controller Counter Files
Reading / Writing Controller Control Files
Reading / Writing Controller ASCII Files
Reading / Writing Controller BCD Files
Reading / Writing Controller Message Files
Reading Controller ASCII String Files
Using the Mode Function
Using the Memory Transfer Function
Using the Clear Fault Function
To access the Special Menu:
1. Select item 3 from the Mode Menu to access the Special Menu:
1 Reset
2 Com-Port 4 Other
You are prompted for the controller address you want to access.
Or PLC depending
on operating system
2. Select the current node address [0] or press [1] and enter a different node
number. The new SLC node address only applies to P-A/D function, not
the resident application.
The Special Menu is displayed
1 P-A/D
2 Mode
Note: A security access code may be assigned in the application restricting
access to the Special Menu.
C
Appendix
A–B
Page
C–1
C–2
C–3
C–4
C–5
C–6
C–8
C–10
C–12
C–14
C–15
C–17
C–18
C–19
C–20
3 Special
SLC 50X Address
1= Edit Addr 0=Bypass
3 Mem Xfer
4 Clr Fault
C–1