Table of Contents
Advertisement
Chapter 4
Transferring Applications
Uploading an Application
. You will not see this prompt if
a monitor was specified during
installation.
4–8
This section shows how to upload an application from the DTAM Micro to a
computer running DPS software (Catalog No. 2707-NP, series C or later).
Refer to the DPS User manual (Publication No. 2707-801) for additional
instructions.
1. Apply power to the DTAM Micro.
The following message appears in the window of the DTAM Micro.
If you do not see this message, check the DIP switch settings.
DIP Switch position #1 must be in the Closed (ON) position.
2. On your computer, move to the /DPS subdirectory.
C:\DPS>
3. Type dps and press [Return] to start the program.
C:\DPS>dps [Return]
4. Specify whether you are using a color monitor. Enter Y or N.
5. The startup screen displays.
Technical Support
Programming Mode
Waiting For Program
Voice: 440–646–6800
FAX: 440–646–6850 or 6890
E–mail: RACLEASKTHEEXPERT@RA.ROCKWELL.COM
Advertisement
Table of Contents
