Table of Contents
Advertisement
Appendix C
DTAM Micro
Special Controller Functions
C–16
7. Press [NEXT] to display the value in a binary format:
F=MG011
0011111000111110
8. To change a value, move the cursor into the data field using the [PREV]
and [NEXT] keys. Enter the new data. If you are editing binary data, use
the [+/-] key to toggle the data between 1 and 0.
9. Press [
] to to load the new data into the file element.
10. To exit, press the [MODE] key to return to the initial P-A/D screen.
You can press the [MODE] key at any time during the P-A/D function.
11. Pressing the [MENU] key at the P-A/D screen exits the P-A/D function
and displays the Main Menu.
Elem=003.01
Advertisement
Table of Contents
