Chapter 2
DTAM Micro Overview
2–4
Communications Port
The DTAM Micro has either an RS-232 or RS-485 port.
•
Catalog No. 2707-M232P3 has RS-232 port
•
Catalog No. 2707-M485P3 has RS-485 port
DIP Switch
A six position DIP switch selects various operating settings. This switch is
located under a removable cover on the back. To remove cover, align cover
tabs with notches in hole.
Power Connector
The power connector is a non-removable, screw terminal block located on
the bottom of the unit. Connect 24 VDC to these terminals or use the
optional AC to DC Adapter.