Table of Contents
Advertisement
Chapter 8
Troubleshooting and Maintenance
Keyboard Test
8–8
Use the keyboard test to verify that the keyboard is functioning properly.
To perform the keyboard test:
1. Use the [NEXT] and [PREV] keys to display Keyboard on the
test selection screen.
DTAM Micro Diag Test
2. Press [
] to initiate the test.
The DTAM Micro prompts you to press each key in a sequential order.
Press "F1"
3. Press the keys as prompted form left to right beginning at the top.
Begin
You must press all of the keys in the order prompted. If you press the
wrong key, you must start over with the first key.
4. Pressing the last key in the sequence terminates the keyboard test.
The next test selection screen is displayed.
DTAM Micro Diag Test
5. To terminate the test function , press the [NEXT] and [PREV] keys to
display Reset DUT in the test selection area. Press [
terminal.
Keyboard
Comm Port
End
] to reset the
Advertisement
Table of Contents
