Using The Test Functions - Allen-Bradley 2707-M232P3 User Manual

Using the Test Functions

Use the test selection screen to test or check the following:
•
Reset DUT (resets terminal, terminates test function)
•
DIP switch positions (page 8–6)
•
Display (page 8–7)
•
Keyboard (page 8–8)
•
Communications port (page 8–9)
•
Random Access Memory (page 8–10)
•
System memory (page 8–10)
•
Transmit enable (page 8–12)
To access the test functions:
1. Access the test functions from the Mode Menu.
1 Reset
2 Com-Port 4 Other
2. From the Mode Menu, select item 4 to display the Other Menu:
1 Master
2 Scale
3. Select item 4 from the Other Menu to display the test selection screen:
DTAM Micro Diag Test
< Test Selection>
4. Use the [NEXT] and [PREV] keys to scroll through the test options.
Display the test you want to perform.
5. Press [ ] to initiate the test.
6. To terminate the test, press the [NEXT] and [PREV] keys to display
Reset DUT in the test selection area. Press [
Chapter 8
Troubleshooting and Maintenance
3 Special
3 Simulate
4 Test 5 Ex
Current Test Selection
] to reset the terminal.
8–5