Table of Contents
Advertisement
Objectives
Upload / Download
DIP Switch Settings
Transferring Applications
This chapter describes how to transfer applications between the offline
programing software (DPS) and the DTAM Micro. It contains the
following sections:
Section
Upload/Download DIP Switch Settings
Before you can upload or download an application, you must verify that
DIP switch position #1 is On as shown. To access the DIP switch, remove
the cover from the access hole on the back of the DTAM Micro (align cover
tabs with notches in hole to remove). The DTAM Micro is shipped without
the cover installed, you can find it in the hardware bag.
Side View
ON =
must be On as shown.
DIP Switch Positions #2
through #6 can be in any position.
4
Chapter
A-B
Page
4-1
4-2
4-2
4-3
4-8
1
2
3
4
5
6
OPEN
Back of DTAM Micro
4-1
Advertisement
Table of Contents
