Programming The Dtam Micro; Dtam Plus Programming Software (Dps); Upload/Download Connections - Allen-Bradley 2707-M232P3 User Manual

Programming
the DTAM Micro
The DTAM Micro is programmed off-line using a personal computer running
DTAM Plus Programming Software (DPS). Operating system upgrades are
also transferred using a personal computer.
DTAM Programming Software (DPS)
Use DPS software (Catalog No. 2707-NP, Series H or later) to create
application screens for both the DTAM Micro and DTAM Plus Operator
Terminals. For a description of DPS, refer to the Programming Manual
(Publication No. 2707-801).

Upload/Download Connections

For programming and configuration, the DTAM Micro is connected to your
computer's RS-232 port. If you have a DTAM Micro RS-485 version, an
RS-232 to RS-422 converter cable (Catalog No. 2707-NC5) is required. The
RS-485 version of the DTAM Micro is compatible with the converter cable's
RS-422 output.
Upload/Download Connection to RS-232 DTAM Micro
Programming Terminal
Upload/Download Connection to RS-485 DTAM Micro
Programming Terminal
Chapter 2
DTAM Micro Overview
Cable
(Catalog No. 2707-NC2)
RS-232 to RS-422
Interface
Converter
Built Into Cable
Cable
(Catalog No. 2707-NC5)
DTAM Micro
RS-232 Port
DTAM Micro
RS-485 Port
2–11