Table of Contents
Advertisement
Chapter 4
Transferring Applications
Upload / Download
Connections
RS-485 Version (Catalog No. 2707-M485P3)
Use Upload/Download Cable (Catalog No. 2707-NC5)
RS-232 Version (Catalog No. 2707-M232P3)
Use Upload/Download Cable (Catalog No. 2707-NC2)
Computer Setup
4–2
To download an application to the DTAM Plus, you must:
•
connect a power supply (refer to Chapter 3)
•
connect the (Catalog No. 2707-NC2) upload/download cable if you have
the RS-232 version
•
connect the (Catalog No. 2707-NC5) upload/download cable if you have
the RS-485 version. This cable converts the computer's RS-232 output to
RS-422 which is compatible with the DTAM Micro RS-485 port.
To Computer
RS-232 Port
Upload and download functions are initiated from a personal computer
running the programming software DPS (Catalog No. 2707-NP, series H or
later). Transfer functions automatically occur at 9600 Baud.
After the transfer is complete, the DTAM Micro Baud rate is set to the
parameters defined by the application program residing in the DTAM Micro.
DTAM Micro
Refer to Chapter 3
for power connections.
Advertisement
Table of Contents
