Table of Contents
Advertisement
. You will not see this screen if a
communication port was
specified during installation.
If a communication link does not
occur in 10 seconds, you get an
error message. Check DIP switch
settings and cable connections.
8. Highlight Download File to DTAM Micro and press [Return].
The Communication Port Selection screen appears.
9. Highlight the serial port on your computer that is connected to the
DTAM Micro (COMM 1 or COMM 2) and press [Return].
10. When communication is established, the following screen appears:
11. Enter or select the file name that you want to download. If the
application file type (DH-485 or PLC5 DF1) is different from the existing
operating system, you are prompted to download the new operating
system.
Chapter 4
Transferring Applications
4–5
Advertisement
Table of Contents
