Appendix C
DTAM Micro
Special Controller Functions
Using the Clear
Fault Function
C–20
Use the Clear Fault function to clear all major and minor faults in the logic
controller.
To clear controller faults:
1. If you are clearing a PLC-5, the controller must be in Program or Remote
Program mode.
2. Select item 4 from the Special Menu to access the Clear Fault function.
You are prompted to clear faults:
1 = Clear Faults
0 =Abort
3. Press [1] to clear the faults or [0] to abort the function.
The faults are cleared and you are returned to the special functions menu:
1 P-A/D
2 Mode
3 Mem Xfer
4 Clr Fault