Merck APC SmartTouch Operation Manual page 26

This window will appear
Add the IP address and the Subnetmask shown above.
Press the OK button twice.
Now the IP and Subnet Mask address has been set to
communicate with the APC Download Utility Software.
UsB Connection
For direct connection between a single computer and the
APC SmartTouch we recommend the use of a USB connec-
tion.
Plug the USB cable into the APC SmartTouch and into
a USB port of the computer then start the APC Download
Utility software pear.
26
To use the Automatic
connection click here