Programming Functions Using The General Display - Sanremo CAFE RACER CR2 Instruction Booklet

continue programming the doses for the other
available brews:
D 1 Single espresso coffee
D 2 Single long coffee
D 3 Double espresso coffee
D 4 Double long coffee
DC Middle button (B)
- Press button (B) to exit function programming
mode .
IMPORTANT: After programming
middle button, it is possible to
have continuous delivery by
pressing twice the button (B)
12.3 PROGRAMMING FUNCTIONS USING THE
GENERAL DISPLAY
The following functions can be programmed and
viewed through the display (2):
• Time, auto-on/auto-off and day of the week
settings;
Programming
• Statistics;
• Complete washing of the groups.
To enter this settings menu, press and hold but-
ton (B) on the first group for 10 seconds.
The following screen is displayed:
- To modify the time settings, press button (A) on
the second group.
- To move on and modify the next function, press
button (B) on the first group
If you have chosen to modify the time settings,
the following screen will be displayed:
19:22 MONDAY
The modifiable value flashes. To change the
value, press buttons (A) or (C), then press button
(B) to confirm the choice and move on to the next
value to be set.
Press button (B) to set the auto-on time.
As an alternative to the OFF mode, it is possible to
set the ECO mode that keeps the machine active
during the ECO3/ECO4 phase of "Energy saving"
mode explained in the relevant chapter.
The following screen will be displayed:
49
CAFÈ RACER
set
TIME
set TIME
EN